The following is a compilation and explanation of the product parameters:
Input voltage: Support 12 V or 24 V.
input voltage range: 11V to 32V, strong compatibility.
Nominal power consumption without peripherals: 2 W, low power design.
can bus: 2 ISO-11898 standard CAN buses, configurable bit rate (default 500 kbps).
Digital output: 3 outputs, 24 V push-pull, maximum 100 mA (sink or source current).
Digital input: 2 inputs, compatible with 24 V and 12 V, with a maximum voltage of 30 V.
LED indicator: 3 12V outputs with overcurrent protection.
Ethernet: 100 Mbps RJ45 interface.
SD memory card: Standard 16 GB memory card.
SIM card slot: Micro SIM card slot (user's own SIM card).
contactor output: 2 independent outputs, maximum driving current of 5 A.
Contactor feedback input: 2 feedback inputs used to detect contactor status.
communication line: Includes PHY1/PHY2 (10BaseT1S Ethernet), CE (Charging Enable), ID (Insertion Detection).
temperature measurement: 2 PT1000 inputs, 1 dedicated CAN bus for temperature data transmission.
entrance locking: Support inlet lock motor control to realize automated charging connection.
Operating temperature:-40 °C to +125 °C, adapted to extreme environments.
Protection grade: IP 69K, dustproof and resistant to high-pressure flushing.
impact resistance: Can withstand 50g impact and 20 pulse tests.
Size: 11.43 × 11.68 cm, compact design.
environmental compliance: Comply with RoHS standards and no harmful substances.
Multi-standard compatibility: Support MCS charging protocol and industrial communication interfaces (CAN, Ethernet).
high reliability: Wide temperature operation, high protection level and impact resistance design, suitable for vehicle-mounted and industrial scenarios.
function integration: Integrate temperature monitoring, contactor control and automated locking control to support full charging process management.
Expansibility: Provides interfaces such as SD card and SIM card slot to facilitate data storage and remote communication.
The following is a compilation and explanation of the product parameters:
Input voltage: Support 12 V or 24 V.
input voltage range: 11V to 32V, strong compatibility.
Nominal power consumption without peripherals: 2 W, low power design.
can bus: 2 ISO-11898 standard CAN buses, configurable bit rate (default 500 kbps).
Digital output: 3 outputs, 24 V push-pull, maximum 100 mA (sink or source current).
Digital input: 2 inputs, compatible with 24 V and 12 V, with a maximum voltage of 30 V.
LED indicator: 3 12V outputs with overcurrent protection.
Ethernet: 100 Mbps RJ45 interface.
SD memory card: Standard 16 GB memory card.
SIM card slot: Micro SIM card slot (user's own SIM card).
contactor output: 2 independent outputs, maximum driving current of 5 A.
Contactor feedback input: 2 feedback inputs used to detect contactor status.
communication line: Includes PHY1/PHY2 (10BaseT1S Ethernet), CE (Charging Enable), ID (Insertion Detection).
temperature measurement: 2 PT1000 inputs, 1 dedicated CAN bus for temperature data transmission.
entrance locking: Support inlet lock motor control to realize automated charging connection.
Operating temperature:-40 °C to +125 °C, adapted to extreme environments.
Protection grade: IP 69K, dustproof and resistant to high-pressure flushing.
impact resistance: Can withstand 50g impact and 20 pulse tests.
Size: 11.43 × 11.68 cm, compact design.
environmental compliance: Comply with RoHS standards and no harmful substances.
Multi-standard compatibility: Support MCS charging protocol and industrial communication interfaces (CAN, Ethernet).
high reliability: Wide temperature operation, high protection level and impact resistance design, suitable for vehicle-mounted and industrial scenarios.
function integration: Integrate temperature monitoring, contactor control and automated locking control to support full charging process management.
Expansibility: Provides interfaces such as SD card and SIM card slot to facilitate data storage and remote communication.
Shanghai ICP No. 2022023306
